Generally used to press: All specification wall tile, strip tile and mosaic.
Back to list
1.Adopting the wide type structure, improving the out-put per pressing and reducing the energy-saving.
2.Outside suoercharger could accelerate the moving parts, improving the pressing speed.
3.The unique prefiling valve is installed directly under the upper beam, which greatly reduces the volume of the high-pressure oil chamber, improves the rigidity of the pressure transfer chain, increases the pressurization speed and saves system energy.
| 主要技术参数 | TECHNICAL DATA | UNIT | YP1080 |
| 最大压制力 | Max.Pressing Force | kN | 10800 |
| 最大顶出力 | Max.Ejecting Force | kN | 260 |
| 动梁最大行程 | Max.Plunger Stroke | mm | 150 |
| 动梁下平面与工作台面最小间距 | Min.Distance between Press Plunger and Table | mm | 385 |
| 动梁下平面与工作台面最大间距 | Max.Distance between Press Plunger and Table | mm | 535 |
| 左右立柱间净空 | Clearance between Columns | mm | 1400 |
| 动梁工作面前后宽度 | Useful Width of Plunger | mm | 515 |
| 最大填料深度 | Max.Filling Depth | mm | 60 |
| 空循环次数可达 | Working Cycles in idle Stroke | mm-1 | 26 |
| 周期中加压次数 | Strokes Per Cycle | times | 2～3 |
| 主电机功率 | Power of the Main Motor | kW | 55 |
| 系统装油量 | System Oil Capacity | L | 900 |
| 系统耗气量 | Air Consumption | m3/h | 0.2 |
| 常温水流量 | Water Consumption at 24℃ | m3/h | 18 |
| 主机重量 | Weight of the Press Body | t | 30.1 |
support hotline 0757-87336633
address ：广东省佛山市三水中心科技工业区C区25号
mail ：hlm@hltpress.com
粤公网安备 44060702000375号
粤ICP备15050742号
