简体中文 ENGLISH

YP3600D Automatic Hydraulic Press

Generally used to press: Tile size: 400*400mm、500*500mm、600*600mm Floor tile; 300*600mm、400*800mm Inner wall tile.

Generally used to press: Tile size: 400*400mm、500*500mm、600*600mm Floor tile; 300*600mm、400*800mm Inner wall tile.

Back to list

Technical Characteristics Technical Parameters

1.The new designed steel wire winded pre-load structure greatly reduces the stress concentration and maintains sufficient rigidity of the frame, having superior fatigue resistance and load stability.

2.The main cylinder adopts double cylinder structure.

3.The moving beam adopts four columns guiding, which is high precision and stability.

4.Equipped with a new multi-cylinder plate type servo ejector (HLT patented technology), with high accuracy and good reliability.

5.Adopting a large capacity prefiling oil tank, it’s good at improving liquid filling quality of master cylinder and pressing performance.

6.The latest wide channel springless prefilling valve (HLT patented technology), increases the filling and discharging speed resulting in faster pressing cycle.

7.Optimize the hydraulic control system; the plunger position, main cylinder pressure, and the ejector all adopt the proportional servo control tech. The key components are selected from the top brands of world to ensure the high performance and reliability of press.

8.Electronic System Upgrade: New HLT framework control program provides flexible operation and accurate performance repetition. Using the latest controller, the running speed is faster, more stable, and more function. The new optimized control system software, and the use of graphical interface, its functions are more powerful, more complete, and more user-friendly. Using of anti-jamming digital pressure sensor makes the pressure control more accurate and stable.

要技术参数 TECHNICAL DATA UNIT YP3600D
最大压制力 Max.Pressing Force kN 36000
最大顶出力 Max.Ejecting Force kN 275
动梁最大行程 Max.Plunger Stroke mm 160
动梁下平面与工作台面最小间距 Min.Distance between Press Plunger and Table mm 460
动梁下平面与工作台面最大间距 Max.Distance between Press Plunger and Table mm 620
左右立柱间净空 Clearance between Columns mm 2500
动梁工作面前后宽度 Useful Width of Plunger mm 920
最大填料深度 Max.Filling Depth mm 70
空循环次数可达 Working Cycles in idle Stroke mm-1 21
周期中加压次数 Strokes Per Cycle times 2~3
主电机功率 Power of the Main Motor kW 110
系统装油量 System Oil Capacity L 1600
系统耗气量 Air Consumption m3/h 0.5
常温水流量 Water  Consumption at 24℃ m3/h 18
主机重量 Weight of the Press Body t 107

Products Recommended

  • support hotline 0757-87336633

    address :广东省佛山市三水中心科技工业区C区25号

    mail :hlm@hltpress.com