简体中文 ENGLISH

YP12090 Automatic Hydraulic Press

Generally used to press: Tile thickness:3-30mm 3-600*1200mm、2-800*800mm、900*1800mm、2-1000*1000mm、1000*2000mm、2-1200*1200mm、800*2400mm、1200*2400mm etc, Floor tile, L-size thin tile (slab), Glaze-polished tile, Full body marble tile and Sintered stone.

Generally used to press: Tile thickness:3-30mm 3-600*1200mm、2-800*800mm、900*1800mm、2-1000*1000mm、1000*2000mm、2-1200*1200mm、800*2400mm、1200*2400mm etc, Floor tile, L-size thin tile (slab), Glaze-polished tile, Full body marble tile and Sintered stone.

Back to list

Technical Characteristics Technical Parameters Lay-out Drawing

1.The new designed steel wire winded pre-load structure greatly reduces the stress concentration and maintains sufficient rigidity of the frame, having superior fatigue resistance and load stability.

2.External combined main cylinder structure is stable and reliable, with long service life.

3.Equipped with a new multi-cylinder plate type servo ejector (HLT patented technology), with high accuracy and good reliability.

4.The moving beam adopts four columns guiding, which is high precision and stability.

5.With the newest technology for pressure cylinder, the multi-lever pressing and speed governing functions are realized.

6.Optimize the hydraulic control system; the plunger position, main cylinder pressure, and the ejector all adopt the proportional servo control tech. The key components are selected from the top brands of world to ensure the high performance and reliability of press.

主要技术参数 TECHNICAL DATA UNIT YP12090
最大压制力 Max.Pressing Force kN 120000
最大顶出力 Max.Ejecting Force kN 400
动梁最大行程 Max.Plunger Stroke mm 220
动梁下平面与工作台面最小间距 Min.Distance between Press Plunger and Table mm 580
动梁下平面与工作台面最大间距 Max.Distance between Press Plunger and Table mm 800
左右立柱间净空 Clearance between Columns mm 3030
动梁工作面前后宽度 Useful Width of Plunger mm 1400
工作台面前后宽度 Width of Press Table mm 1620
最大填料深度 Max.Filling Depth mm 80
空循环次数可达 Working Cycles in idle Stroke mm-1 14
周期中加压次数 Strokes Per Cycle times 2~5
主电机功率 Power of the Main Motor kW 220
系统装油量 System Oil Capacity L 3800
系统耗气量 Air Consumption m3/h 0.5
常温水流量 Water  Consumption at 24℃ m3/h 45
主机重量 Weight of the Press Body t 340

Products Recommended

  • support hotline 0757-87336633

    address :广东省佛山市三水中心科技工业区C区25号

    mail :hlm@hltpress.com