简体中文 ENGLISH

YP22090/YP20090 Automatic Hydraulic Press

Generally used to press: Tile thickness:3-30mm 4-600*1200mm、3-800*800mm、3-800*1600mm、3-900*1800mm、2-1000*1000mm、2-1000*2000mm、2-1200*1200mm、800*2600(2700)mm、1200*2400mm、1200*2600(2700/2800)mm、1350*2700mm、1500*1500mm、1000*3000mm、2000*2000mmetc, Floor tile, L-size thin tile (slab), Glaze-polished tile, Full body marble tile and Sintered stone.

Generally used to press: Tile thickness:3-30mm 4-600*1200mm、3-800*800mm、3-800*1600mm、3-900*1800mm、2-1000*1000mm、2-1000*2000mm、2-1200*1200mm、800*2600(2700)mm、1200*2400mm、1200*2600(2700/2800)mm、1350*2700mm、1500*1500mm、1000*3000mm、2000*2000mmetc, Floor tile, L-size thin tile (slab), Glaze-polished tile, Full body marble tile and Sintered stone.

Back to list

Technical Characteristics Technical Parameters Lay-out Drawing

1.The new designed steel wire winded pre-loadstructure greatly reduces the stress concentration and maintains sufficientrigidity of the frame, having superior fatigue resistance and load stability.

2.Externalcombined main cylinder structure is stable and reliable, with longservice life.

3.Adopting double prefiling valve and largecapacity oil cylinder, improve the filling speed and quality of the maincylinder, thus improving the pressing performance.

4.Equipped with a new multi-cylinder plate typeservo ejector (HLT patented technology), with high accuracy and goodreliability.

5.The moving beam adopts four columns guiding,which is high precision and stability.

6.With the newest technology for pressurecylinder, the multi-lever pressing and speed governing functions are realized.

7.Optimize the hydraulic control system; theplunger position, main cylinder pressure, and the ejector all adopt theproportional servo control tech. The key components are selected from the topbrands of world to ensure the high performance and reliability of press.

8.With the traditional mould for pressing, it’ssimple, stable and high efficiency.

9.A new generation Internet of things for largeslab press, designed specially for ensuring the forming quality. The newoptimized control system software, and the use of graphical interface, itsfunctions are more powerful, more complete, and more user-friendly.


主要技术参数 UNIT YP20090 YP22090
最大压制力 kN 200000 220000
最大顶出力 kN 400 400
动梁最大行程 mm 250 250
动梁下平面与工作台面最小间距 mm 650 650
动梁下平面与工作台面最大间距 mm 900 900
左右立柱间净空 mm 3600 3800
动梁工作面前后宽度 mm 1800 2100
工作台面前后宽度 mm 2050 2450
最大填料深度 mm 80 80
空循环次数可达 mm-1 10 9
周期中加压次数 times 2~5 2~5
主电机功率 kW 3×110=330 4×90=360
系统装油量 L 7500 8000
系统耗气量 m3/h 0.5 0.5
常温水流量 m3/h 55 60
主机重量 t 610 720

Products Recommended

  • support hotline 0757-87336633

    address :广东省佛山市三水中心科技工业区C区25号

    mail :hlm@hltpress.com